The CCNA certification will be your first step in the world of Network and Security. Is that enough to get the job or designation you desire in the field?
You are wrong! The Interview is the biggest obstacle.
Round where only the best of them all get the chance to move on and take the chair with the trust and credibility of employers.
The Best CCNA Interview Questions and Answers to Make Your Interview Easy
If you don’t prepare for a job, it is not complete. These are the top 50 questions you will be asked in a CCNA interview.
Here are the 50 CCNA Interview Questions:
Q1) What is the IPX Access List?
Answer: Extended or Standard
Q2: How do hold-downs work?
Answer: It is to prevent regular updates messages from being reinstating downed via a link
Remove the link from the update message
Q3) Increase DLCI?
Answer: Data Link Connection Identifiers.
Q4) What types of passwords are used in CISCO routers and why?
Answer: There are five types of passwords
Secret, virtual, Terminal Console, Auxillary
Q5: What is the clock rate?
Answer: Use the clock rate to send appropriate information to routers or DCE.
Q6) What are the different types of RIP messages?
Answer: There are two types of message requests and responses.
Q7) Expand BGP
Answer: Border Gateway Protocol
Q8. What is the difference between STP and RSTP?
Answer: STP to prevent loop address; RSPT almost equals STP to reduce port forwarding time.
Q9: Does the CISCO IOS firewall function as a stateful, stateless packet filter?
Answer: The CISCO Internet Security Organization firewall is a stateful filter.
Q10) What are two key features of URL filtering (Q10)
Answer: Predefined URL categories for malware protection
Q11) Define DMZ
Answer: Network is the inside, and all other things as an outside will be in the firewall.
Q12) What type port is in the STP’s container?
Answer: Root port, Designated Port, Blocking port
Q13) Expand the MTU term.
Answer: MTU stands to Maximum Transmission Control Unit.
Q14) What are the various types of memories in CISCO Router’s?
Answer: NVRAM/DRAM/Flash Memory
Q15) Extend the definition of EIGRP.
Answer: EIGRP stands to Enhanced Interior Gateway Protocol.
Q16: What is Administrative Distance?
Answer: Administrative Distance is used to find a trusted routing protocol.
Q17) What router command activates IPV6?
Answer: UNICASTING ROUTE.
Q18) Which are the major states of Switch?
Answer: Disabled, Blocking, Listening, Learning, Forwarding
Q16) What are the main functions of SNMPV3
Answer: Authentication, Encryption, and Message Integrity are the three main functions of SNMPV3.
Q17) Write NTP in its expanded form.
Answer: NTP stands to Network Time Protocol.
Q18) Write the command to display the contents of the NVRAM.
Answer: The Router command is used to display the NVRAM contents.
SHOW START/SHOW START -CONFIG
Q19: What does the term SYSLOG mean?
Answer: SYSLOG is used to store log files for popular servers.
Q20) What types of ACL are there?
Answer: NAMED ACL, EXTENDED ABCL, STANDARD ACL
Q21) What types of VTP are there?
Answer: SERVER MODE. CLIENT MODE. TRANSPARENT MODE.
Q22: Name the two ports for Switches.
Answer: Trunk Port, Access Port
Q23) What’s the administrative distance for OSPF?
Answer: The administrative distance of OSPF measures 110.
Q24) What does Distance Vector mean?
Answer: Distance vector refers to the protocol that is used for periodic updates after every 30 seconds.
Q25: What are the differences between the two types?
Answer: Cross Cable or Straight Cable
Q26) List the main functions of the Transport Layer.
Answer: Segment Fragmentation and Numbering Segment. Multi-Tasking and Flow control.
Q27) Describe the two types of addresses that are available.
Answer: IPV4 (Internet Protocol Version 4) & IPV6 (Internet Protocol Version
